Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Voice-Translation Rule

Hi,

Hi have configure a voice port that is connected to a fax to prefix the caracter 'F' to all incoming fax call. If i configured the folowing translation-rule the call goes to the pstn:

Translation Rule for prefix the F character in the fax voice-Port

!

translation-rule 1

Rule 1 ^. F

!

!

voice-port 2/0/0

translate called 1 !Translation for prefix the F caracter

compand-type a-law

cptone PT

description FAX port

station-id number 210007

dial-peer voice 8203 pots

corlist outgoing AFTER-HOURS

description CONN-AFTER-HOURS-FAXES

paramspace callsetup after-hours-exempt TRUE

destination-pattern F0[23789]........

direct-inward-dial

port 2/0/8

forward-digits 9

If I change the translation-rule to a voice translation-profile, the call is disconnected after I hit the first digit:

voice-translation rule 9

rule 1 /^/ /F/

voice translation-profile PREFIX-F-AFTER-HOURS-FAX

translated called 9

voice-port 2/0/0

translation-profile incoming PREFIX-F-AFTER-HOURS-FAX

compand-type a-law

cptone PT

description FAX port

station-id number 210007

Can any one give me same help.

Thanks

1 REPLY
Hall of Fame Super Gold

Re: Voice-Translation Rule

Hi,

Try:

rule 1 // /F/

115
Views
0
Helpful
1
Replies