I have a client with a UC520 . Lately the client has been concerned that when they check the general delivery voicemail, there may be 0. Then they either check a few hours later or the next day and they show a few in there. What could be causing this? I was thinking maybe the flash needs to be upgraded to a bigger one. Just a shot in the dark though.
wow, thanks for that. The other post refered to the UC560 and was never answered. I thought it would be better to start a new thread since that one was resolved. So , technically it was never discussed. I saw your response but was hoping for some other input as well.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...