Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Voicemail license for CME 2951

Dear All,

I have Cisco CME 2951 and want to have voicemail for users. So how to check whether I have licenses for voicemail or how I can order the same.

Let me know if config needed.

Thank You,

Abhisar.

3 REPLIES
Cisco Employee

Voicemail license for CME 2951

Abhisar,

Do you have a CUE module?

The CME 2951 router can't do voicemail by itself, you need to have a CUE module for that to work.

In other words licenses will not be neded on CME, noly on CUE and depends on the CUE version you have.

~ Luis Ramirez,

New Member

Re: Voicemail license for CME 2951

Dear Luis,

Thank you for your reply.

Regarding module, I dont  have idea, but I have attached show tech from the CME router, request if  you can check and let me know the information about the module and  voicemail license as I am not much aware about VOIP.

Thank You,

Abhisar.

Cisco Employee

Re: Voicemail license for CME 2951

Abhisar,

You do have a CUE module on the router.

SM-SRE-710-K9 on Slot 1.

interface SM1/0

ip unnumbered GigabitEthernet0/0.2

service-module ip address 10.1.1.2 255.255.255.0

!Application: CUE Running on SM

service-module ip default-gateway 10.1.1.1

Can you access thw IP address 10.1.1.2 through webpage?

Or perhaps use the following command to console the CUE?

service-module SM1/0 session

~Luis Ramirez,

200
Views
0
Helpful
3
Replies
CreatePlease login to create content