voicemail is working. MWI is not. I can see the sip notify message come in with the ccsip messages debug and I can see a call go out to the mwi dn for the phone. But the light is not turning on. Here is the config
With voip.ms the sip notify messages come in with the account number. So I created an ephone-dn with that number on it.
This is a 7975 sccp phone with 8 lines
mwi-server dns:chicago.voip.ms expires 160 port 5060 transport udp unsolicited
I have tried using num-exp to change 138422 to 5001 which is the first line on the phone and putting mwi sip on that dn but it still did not turn the light on.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...