We basically want the following thing. We want to implement a system that uses the Cisco 3825 Router we currently have.
A users makes a call to a certain number and can leave in a message. Kinda like Voicemail. The router has to save and store these messages somewhere.
We have a list of telephone numbers and the router has to call these numbers and play one of the saved messages and give them options to choose from, for example, 1 for Yes, 2 for No, etc. Then their chosen options have to be saved and stored somewhere. Ofcourse our development branch will develop a tool that calls these numbers.
I hope this is possible with the Cisco 3825 Router we have. It also has a NME-CUE Module with Cisco Unity Express 3.1 and
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...