Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VoIP - IPhone & Desktop

Thinking of introducing voip in our network. Have Cisco 2960 switch and Cisco Catalyst 500 switches.

Have one of the ip phones with 2 x 10/100 interfaces. Idea being to connect a desktop PC to one of the ports.

The best practice is to set up a voice VLAN and data VLAN.

How should the link between the IP Phones and the Cisco switch be set up? As a Dot1Q Trunk? Is that possible?

4 REPLIES

Re: VoIP - IPhone & Desktop

this is voice vlan config for 2960 from cisco.com

http://cisco.com/en/US/partner/products/ps6406/products_configuration_guide_chapter09186a00805a766a.html

or

interface FaX/Y

switchport trunk native vlan [datavlan]

switchport trunk allowed vlan [voicevlan],[datavlan]

switchport mode trunk

switchport voice vlan [voicevlan]

Hall of Fame Super Gold

Re: VoIP - IPhone & Desktop

Actually I use

switchport mode access [datavlan]

switchport voice vlan [voicevlan]

I prefer this over leaving user ports in trunk mode.

New Member

Re: VoIP - IPhone & Desktop

what does the following mean?

from the link above:

Note: Voice VLAN is only supported on access ports and not on trunk ports, even though the configuration is allowed.

New Member

Re: VoIP - IPhone & Desktop

can someone plz point me to qos commands for voip.

thx

298
Views
0
Helpful
4
Replies
CreatePlease login to create content