Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VOIP outgoing call issue

Hi,

Could I know how to fix it the following issue ? Users said when they press the digit slowly then the calls are successful. When they press faster, they hear busy tone.

--------------------------------

Users are having problem to make leased line calls. The pattern is before they complete the key-press, they hear the busy tone.  To call a extension in HK, e.g. 484, I need to press 382484, where 3 is the access code to the tie-line, 82 to RSHK, and 484 is the extension. Now after I press 382, there is busy tone already. We keep trying for few more times, we can then get thru.

------------------------------

Thanks a lot

Leung che man

4 REPLIES

Re: VOIP outgoing call issue

You need to check for overlap in your dial plan.  Then we can go from there.

Hailey

Please rate helpful posts!

New Member

Re: VOIP outgoing call issue

Hi Hailey,

The dialplan is not overlapped with each other. Is this the problem about the timing of dial digit ?

----------------------------------------------------

RSHZ#sh dial-peer voice summary

dial-peer hunt 0

             AD                                    PRE PASS                OUT

TAG    TYPE  MIN  OPER PREFIX    DEST-PATTERN      FER THRU SESS-TARGET    STAT PORT

11     pots  up   up             86                 0                      up   0/0/0:1

101    voip  up   up             82[1-8]T           0  syst ipv4:1.1.1.1

102    voip  up   up             829T               0  syst ipv4:1.1.1.1

111    voip  up   up             84[1-8]....        0  syst ipv4:2.2.2.2

112    voip  up   up             8491817T           0  syst ipv4:2.2.2.2

121    voip  up   up             83[1-8]T           0  syst ipv4:57.3.3.3.3

122    voip  up   up             839T               0  syst ipv4:57.3.3.3.3

131    voip  up   up             88[1-8]T           0  syst ipv4:57.4.4.4.4

132    voip  up   up             889T               0  syst ipv4:57.4.4.4.4

RSHZ#

------------------------------------------------

Thanks

Leung Che Man

Hall of Fame Super Gold

Re: VOIP outgoing call issue

There is no match for 382 above ? Also see if you can register a phone into thta site and try yourself, sometime users report are incorrect.

New Member

Re: VOIP outgoing call issue

The prefix 3 is deleted before accessing the voice gateway so only 82xxx will be sent.

Thanks Leung Che Man

182
Views
0
Helpful
4
Replies