i have impelmented a 2 voice gateway (VG) on Two sites. Those VG are connected each one to one PBX :
1- Site A : -> The VG connected to the PBX by tow BRI
-> The PBX has 5 Analogue Phone ( 100 VIP,101,102,103,104)
2- Site B : The VG connected to the PBX by E1 ( Qsig).
-> The PBX has 6 Analogue phones ( 200,201,202,203,204,206).
The problem that client ask for me its according to the folowing Scenario:
1- On Site A , the max call are 4 (simultanly)
2- when ,the Extension ( 101,102,103 & 104) are call to the remote Site, the VIP extension cannot make a call.
The customer ask me , if there is any possibility ( configuration) to do on VG to always permit the (VIP Extension) to make CALL [ the customer dont have problem to drop any current 4 calls to permit the Call for the VIP Extension)
on the WAN link , there are only 3 possible calls.
so my question is : if the extension ( 101,102 and 103) are in call, the customer ask if the '100 VIP) want to make a call, there is a possiblity to make always a priority for this extension ? ( no problem to drop any of the current call)
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...