cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
424
Views
4
Helpful
5
Replies

VoIP via 7204vxr

capajaron
Level 1
Level 1

Hi All,

Could it be possible to use my 7204VXR router for routing calls from Avaya Definity phone system between our intranet connections on an E1 pipe?

I will be going to connect my 7204VXR router to the DS1 board of my Avaya Definity,our intranet end will have the same setup as well.

My problem is i don't know the proper configuration on the E1 interface side & the Avaya interface side.

Could someone give me a sample configuration on this setup if ever this is possible?

Thanks

Cliff

5 Replies 5

paolo bevilacqua
Hall of Fame
Hall of Fame

Do you have already the PA-VXA, PA-VXB, or PA-VXC needed to make voice connections on a 7200 ?

Hi,

We have PA-VXC-2TE1+ already connected.

How should i configure my router?

Thanks in Advance.

Cliff

card type x/y E1

controller e1 x/y

clock source internal

pri-group

int serial x/y:15

isdn protocol-emulate network

Then check "show controller E1" and "show isdn status" if it came up.

thanks,

also i have multi-channel T1/Pri card with 2 ports.

How would i configure if my setup is like this?

1. PA-VXC-2TE1 > inbound or going to intranet end

2. multi-channel T1/Pri will be going to Avaya/DS1.

Is it the right setup?.How should i configure my VXR Router?..

Thanks

Cliff

Hi, the PA-VX connects to PBX. The other card is of no use for voice. The rest of the setup depends on what you want to do and what other systems you have.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: