VoIP via 7204vxr

[capajaron]

Hi All,

Could it be possible to use my 7204VXR router for routing calls from Avaya Definity phone system between our intranet connections on an E1 pipe?

I will be going to connect my 7204VXR router to the DS1 board of my Avaya Definity,our intranet end will have the same setup as well.

My problem is i don't know the proper configuration on the E1 interface side & the Avaya interface side.

Could someone give me a sample configuration on this setup if ever this is possible?

Thanks

Cliff

[paolo bevilacqua]

Do you have already the PA-VXA, PA-VXB, or PA-VXC needed to make voice connections on a 7200 ?

[capajaron]

Hi,

We have PA-VXC-2TE1+ already connected.

How should i configure my router?

Thanks in Advance.

Cliff

[paolo bevilacqua]

card type x/y E1

controller e1 x/y

clock source internal

pri-group

int serial x/y:15

isdn protocol-emulate network

Then check "show controller E1" and "show isdn status" if it came up.

[capajaron]

thanks,

also i have multi-channel T1/Pri card with 2 ports.

How would i configure if my setup is like this?

1. PA-VXC-2TE1 > inbound or going to intranet end

2. multi-channel T1/Pri will be going to Avaya/DS1.

Is it the right setup?.How should i configure my VXR Router?..

Thanks

Cliff

[paolo bevilacqua]

Hi, the PA-VX connects to PBX. The other card is of no use for voice. The rest of the setup depends on what you want to do and what other systems you have.