cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5668
Views
0
Helpful
3
Replies

VWIC is showing as "WIC module not supported/disabled in this slot"

akshaysaxena
Level 1
Level 1

Hello All,

please help me on this asap!!

Smart Init is enabled

smart init is sizing iomem

                 TYPE      MEMORY_REQ

          HWIC Slot 0      0x00200000

               PVDM 0      0x00200000

    Onboard devices &

         buffer pools      0x0228F000

-----------------------------------------------

               TOTAL:      0x0268F000

Rounded IOMEM up to: 40Mb.

Using 7 percent iomem. [40Mb/512Mb]

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.

           170 West Tasman Drive

           San Jose, California 95134-1706

Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(1)T, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2010 by Cisco Systems, Inc.

Compiled Mon 22-Mar-10 02:13 by prod_rel_team

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco CISCO2901/K9 (revision 1.0) with 483328K/40960K bytes of memory.

Processor board ID FGL162722DK

2 Gigabit Ethernet interfaces

DRAM configuration is 64 bits wide with parity enabled.

255K bytes of non-volatile configuration memory.

250880K bytes of ATA System CompactFlash 0 (Read/Write)

Press RETURN to get started!

*Mar  1 00:00:04.931: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2900 Next reboot level = ipbasek9 and License = ipbasek9

*Mar  1 00:00:05.019: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2900 Next reboot level = uck9 and License = uck9

*Jan 23 07:37:07.403: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory

*Jan 23 07:37:15.119: %MAINBOARD-1-UNKNOWN_WIC: wic card in location 0/0 has an unknown id 0x6EF

*Jan 23 07:37:18.679: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed state to up

*Jan 23 07:37:18.679: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to reset

*Jan 23 07:37:18.679: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to reset

*Jan 23 07:37:19.887: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down

*Jan 23 07:37:19.887: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down

*Jan 23 07:37:20.823: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down

*Jan 23 07:37:20.823: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down

*Jan 23 07:37:21.063: %SYS-5-CONFIG_I: Configured from memory by console

*Jan 23 07:37:23.083: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down

*Jan 23 07:37:23.755: %SYS-5-RESTART: System restarted --

Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(1)T, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2010 by Cisco Systems, Inc.

Compiled Mon 22-Mar-10 02:13 by prod_rel_team

*Jan 23 07:37:23.759: %SNMP-5-COLDSTART: SNMP agent on host Hewitt_Noida is undergoing a cold start

*Jan 23 07:37:37.483: %DSPRM-5-UPDOWN: DSP 1 in slot 0, changed state to up

*Jan 23 07:37:37.483: %DSPRM-5-UPDOWN: DSP 3 in slot 0, changed state to up

*Jan 23 07:37:37.483: %DSPRM-5-UPDOWN: DSP 2 in slot 0, changed state to up

Hewitt_Noida>

Hewitt_Noida>

Hewitt_Noida>

Hewitt_Noida>en

Hewitt_Noida#

Hewitt_Noida#

Hewitt_Noida#sh diag

Slot 0:

        C2901 Mother board 2GE, integrated VPN and 4W Port adapter, 2 ports

        Port adapter is analyzed

        Port adapter insertion time 00:00:56 ago

        EEPROM contents at hardware discovery:

        PCB Serial Number        : FOC1624697D

        Hardware Revision        : 1.0

        Part Number              : 73-11834-08

        Top Assy. Part Number    : 800-30795-06

        Board Revision           : A0

        Deviation Number         : 123694

        Fab Version              : 03

        Product (FRU) Number     : CISCO2901/K9

        Version Identifier       : V06

        CLEI Code                : CMMJA00ARA

        Processor type           : C1

        Chassis Serial Number    : FGL162722DK

        Chassis MAC Address      : d48c.b51a.b668

        MAC Address block size   : 72

        Manufacturing Test Data  : 00 00 00 00 00 00 00 00

        EEPROM format version 4

        EEPROM contents (hex):

          0x00: 04 FF C1 8B 46 4F 43 31 36 32 34 36 39 37 44 40

          0x10: 06 17 41 01 00 82 49 2E 3A 08 C0 46 03 20 00 78

          0x20: 4B 06 42 41 30 88 00 01 E3 2E 02 03 CB 8C 43 49

          0x30: 53 43 4F 32 39 30 31 2F 4B 39 89 56 30 36 20 D9

          0x40: 04 40 C1 CB C2 C6 8A 43 4D 4D 4A 41 30 30 41 52

          0x50: 41 09 C1 C2 8B 46 47 4C 31 36 32 37 32 32 44 4B

          0x60: C3 06 D4 8C B5 1A B6 68 43 00 48 C4 08 00 00 00

          0x70: 00 00 00 00 00 F3 00 65 40 01 25 41 00 87 42 00

          0x80: 00 F8 00 28 03 E8 1C 89 07 D0 20 21 0B B8 20 93

          0x90: 0F A0 21 2F 13 88 21 83 17 70 21 A8 1B 58 21 B0

          0xA0: 1F 40 21 AB 23 28 21 79 27 10 21 78 41 01 1D 42

          0xB0: 00 00 F8 00 28 03 E8 1C 20 07 D0 1F 40 0B B8 20

          0xC0: 6C 0F A0 21 34 13 88 21 34 17 70 21 98 1B 58 21

          0xD0: 98 1F 40 21 98 23 28 21 34 27 10 21 34 FF FF FF

          0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

        PVDM Slot 0:

        128-channel (G.711) Voice/Fax PVDM3 DSP DIMM PVDM daughter card

        Hardware Revision        : 1.0

        Part Number              : 73-11810-03

        Board Revision           : C0

        Deviation Number         : 0

        Fab Version              : 03

        PCB Serial Number        : FOC1602145Q

        RMA Test History         : 00

        RMA Number               : 0-0-0-0

        RMA History              : 00

        Processor type           : 00

        Product (FRU) Number     : PVDM3-128

        Version Identifier       : V01

        EEPROM format version 4

        EEPROM contents (hex):

          0x00: 04 FF 40 05 DC 41 01 00 82 49 2E 22 03 42 43 30

          0x10: 88 00 00 00 00 02 03 C1 8B 46 4F 43 31 36 30 32

          0x20: 31 34 35 51 03 00 81 00 00 00 00 04 00 09 00 CB

          0x30: 8F 50 56 44 4D 33 2D 31 32 38 20 20 20 20 20 20

          0x40: 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF FF FF

          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

        WIC Slot 0:

        Unknown WAN daughter card

        WIC module not supported/disabled in this slot

        Hardware Revision        : 1.0

        Top Assy. Part Number    : 800-34658-01

        Part Number              : 73-13420-01

        Board Revision           : B0

        Deviation Number         : 124402

        Fab Version              : 05

        PCB Serial Number        : FOC16100L9C

        Version Identifier       : V01

        Product (FRU) Number     : VWIC3-2MFT-T1/E1

        CLEI Code                : COUIA7NCAA

        RMA Test History         : 00

        RMA Number               : 0-0-0-0

        RMA History              : 00

        EEPROM format version 4

        EEPROM contents (hex):

          0x00: 04 FF 40 06 EF 41 01 00 C0 46 03 20 00 87 62 01

          0x10: 82 49 34 6C 01 42 42 30 88 00 01 E5 F2 02 05 C1

          0x20: 8B 46 4F 43 31 36 31 30 30 4C 39 43 89 56 30 31

          0x30: 20 CB 90 56 57 49 43 33 2D 32 4D 46 54 2D 54 31

          0x40: 2F 45 31 C6 8A 43 4F 55 49 41 37 4E 43 41 41 03

          0x50: 00 81 00 00 00 00 04 00 D9 03 40 C1 CB FF FF FF

          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Hewitt_Noida#

1 Accepted Solution

Accepted Solutions

Manish Gogna
Cisco Employee
Cisco Employee

Hi Akshay,

As per

http://www.cisco.com/en/US/partner/prod/collateral/routers/ps5855/data_sheet_c36-609138.html

VWIC3-1MFT-T1/E1 is supported since 15.1(1)T1 and later.

Make sure you have this minimum IOS.

HTH

Manish

View solution in original post

3 Replies 3

Aman Soi
VIP Alumni
VIP Alumni

Hi Akshay,

Can u share the show running and sh license all from router?

Did u configure card type e1 command ?

regds,

aman

Manish Gogna
Cisco Employee
Cisco Employee

Hi Akshay,

As per

http://www.cisco.com/en/US/partner/prod/collateral/routers/ps5855/data_sheet_c36-609138.html

VWIC3-1MFT-T1/E1 is supported since 15.1(1)T1 and later.

Make sure you have this minimum IOS.

HTH

Manish

Thanks all.

I have upgrade the IOS and now all commands running.

Regards

Akshay.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: