Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

vwic3-1mft-t1/e1 cd/lp p0

Hello,

do you know if this module can be used for voice?

thanks

Lorenzo

------- have a look to my blog lgrconsulting.com
Everyone's tags (3)
3 REPLIES
Blue

vwic3-1mft-t1/e1 cd/lp p0

Hi

You can use vwic3-1mft-t1/e1 for voice provided you have PVDM modules inserted in router.

Regards

Ronak Patel

Please rate helpful posts by clicking stars below the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
Community Member

vwic3-1mft-t1/e1 cd/lp p0

Thanks for your quick reply.

I wasn't sure because on the old vwic2 there was written ctrl t1/e1 and not cd/lp p0.

thanks

------- have a look to my blog lgrconsulting.com
Blue

vwic3-1mft-t1/e1 cd/lp p0

Hi

In cards terminology CD and LP is following.

• CD (data carrier detect): Indicates a received error on the telco link

• LP (loopback): Indicates that the interface is in loopback mode

Do you have "vwic3-1mft-t1/e1 cd/lp p0" as part number?

Regards

Ronak Patel

rate helpful posts.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
786
Views
5
Helpful
3
Replies
CreatePlease to create content