Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WAN down with AAR ?

How to enable AAR when the WAN link is down ?

Manually we can set the location bandwith to 1 but can we do it automatically ?

Rgds

Luc

4 REPLIES
Silver

Re: WAN down with AAR ?

<http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803ed65e.html>

For AAR to function, you must configure AAR groups and also ensure that the Automated Alternate Routing Enable clusterwide service parameter is set to True. (The default value for this service parameter specifies False.)

Have you have these settings in place?

Ajaz

Gold

Re: WAN down with AAR ?

AFAIK, with CM 4.2, this is currently not possible. You cannot use AAR when WAN goes down. It can be used only when you are out of Bandwidth.

Also, I believe this feature is on the RoadMap, but not sure as to which version it would be added with.

New Member

Re: WAN down with AAR ?

In 4.2 there is a option that will do just that. On the line appearance there is a section labeled Forward Unregistered Internal and Forward Unregistered External. If you set those to the proper DID number then calls will get routed to the PSTN.

This is assuming the servers are at a central location.

New Member

Re: WAN down with AAR ?

Thx, for your reply but we are running 4.1

And this option is not valuable since when a guy is log off perhaps he prefers to transfert is call to his GSM or to the standard.

Still waiting for a new feature !!

Thx

162
Views
0
Helpful
4
Replies