I didn't get what you mean with "connect it to an analog port that is shared with the 7911 phone line you want to activate off of", how can we have a shared analog port connected along with the 7911 digital phone ,we need something that is plugged to the IP telephone port so ,it can be connected to the 7911 cisco phone directly??? Brgrds; Ahmed
I don't know of any device that will go in-line with an IP phone to provide this functionality, and if there is one it is probably siginificantly more money.
What we have done in situations like this before is to program an FXS port (VIC, VG2XX, ATA) with the same number as the 7911. If you had a normal analog phone on there it would ring the same time as the 7911 when the number was dialed, but instead of a normal phone you plug in one of these devices into that port and the device should light whenever the phone rings.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...