UCM 7.12, installed Webdialer and it is working. Also interested in dialing from outlook contacts. I installed CiscoTSP, but I believe I am still missing something. There is no options to call from the mouse click. CiscoTSP.txt only reference installing wave drivers. Thanks
Click-to-Call is a software application that you install locally on each pc. It's fairly straight forward but you will need to set-up some application dial rules to enable correct dialing. It supports dialing from MS Office, outlook, Explore and also Firefox.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...