ā01-15-2014 03:58 AM - edited ā03-16-2019 09:15 PM
Running a 2691 router.. checked the CME & IOS matrix but couldnt determine the correct CME to use for this
Can someone please advise?
Just going to be running some standard phones on this
Thanks in advance.
Solved! Go to Solution.
ā01-17-2014 02:17 AM
No it wont.
Br,
Nadeem
Please rate all useful post.
ā01-15-2014 04:08 AM
I think it will be CME 4.
You can check it by yourself.
Config t#telephony-service
Cntrl+z
show telephony service
You can see right there CME version your IOS support.
Thanks
Manish
ā01-15-2014 02:55 PM
Thanks for your reply Manish.
Doing that command gets invalid command unfortunately Manish.
I will reply with a sh ver soon
ā01-16-2014 12:43 PM
Hi Manish,
cme_router(config)#sh telephony?
% Unrecognized command
cme_router(config)#exit
cme_router#sh tel
Mar 1 08:17:32.195: %SYS-5-CONFIG_I: Configured from console by admin on consoleephony ?
% Unrecognized command
cme_router#sh telephony
^
% Invalid input detected at '^' marker.
cme_router#
cme_router#
cme_router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
cme_router(config)#telephony-service
^
% Invalid input detected at '^' marker.
cme_router(config)#
me_router#sh ver
Cisco IOS Software, 2600 Software (C2691-ENTBASEK9-M), Version 12.4(13b), RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Tue 24-Apr-07 15:32 by prod_rel_team
ROM: System Bootstrap, Version 12.2(8r)T, RELEASE SOFTWARE (fc1)
cme_router uptime is 1 hour, 40 minutes
System returned to ROM by power-on
System restarted at 16:28:02 14:54 Fri Mar 1 2002
System image file is "flash:c2691-entbasek9-mz.124-13b.bin"
Hope this helps
ā01-16-2014 10:28 PM
Its look like you are testing CME on GNS3 ?
Thanks
Manish
ā01-17-2014 01:04 AM
Hi Manish,
Thanks for your reply.
No. Never used GNS3
ā01-17-2014 01:18 AM
Go with this one :
c2691-ipvoicek9-mz.124-15.T14.bin
Br,
Nadeem
Please rate all useful post.
ā01-17-2014 01:56 AM
Thanks Nadeem,
I have c2600-ipvoicek9-mz.124-15.T14.bin
Would that do?
ā01-17-2014 02:17 AM
No it wont.
Br,
Nadeem
Please rate all useful post.
ā01-19-2014 01:22 AM
Thanks Nadeem,
Will try this. May take about 4 days as internal router at home is dead. Have to replace it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide