Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

What is a suitable CME for c2691-ipvoicek9-mz.124-13b

Running a 2691 router.. checked the CME & IOS matrix but couldnt determine the correct CME to use for this

Can someone please advise?

Just going to be running some standard phones on this

Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

What is a suitable CME for c2691-ipvoicek9-mz.124-13b

No it wont.


Br,
Nadeem 

Please rate all useful post.

Br, Nadeem Please rate all useful post.
9 REPLIES

What is a suitable CME for c2691-ipvoicek9-mz.124-13b

I think it will be CME 4.

You can check it by yourself.

Config t#telephony-service

Cntrl+z

show telephony service

You can see right there  CME version your IOS support.

Thanks

Manish

New Member

What is a suitable CME for c2691-ipvoicek9-mz.124-13b

Thanks for your reply Manish.

Doing that command gets invalid command unfortunately Manish.

I will reply with a sh ver soon

New Member

What is a suitable CME for c2691-ipvoicek9-mz.124-13b

Hi Manish,


cme_router(config)#sh telephony?
% Unrecognized command
cme_router(config)#exit
cme_router#sh tel
Mar  1 08:17:32.195: %SYS-5-CONFIG_I: Configured from console by admin on consoleephony ?
% Unrecognized command


cme_router#sh telephony
                ^
% Invalid input detected at '^' marker.

cme_router#

cme_router#
cme_router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
cme_router(config)#telephony-service
                     ^
% Invalid input detected at '^' marker.

cme_router(config)#

me_router#sh ver
Cisco IOS Software, 2600 Software (C2691-ENTBASEK9-M), Version 12.4(13b), RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Tue 24-Apr-07 15:32 by prod_rel_team

ROM: System Bootstrap, Version 12.2(8r)T, RELEASE SOFTWARE (fc1)

cme_router uptime is 1 hour, 40 minutes
System returned to ROM by power-on
System restarted at 16:28:02 14:54 Fri Mar 1 2002
System image file is "flash:c2691-entbasek9-mz.124-13b.bin"

Hope this helps

What is a suitable CME for c2691-ipvoicek9-mz.124-13b

Its look like you are testing CME on GNS3 ?

Thanks

Manish

New Member

What is a suitable CME for c2691-ipvoicek9-mz.124-13b

Hi Manish,

Thanks for your reply.

No. Never used GNS3

Cisco Employee

What is a suitable CME for c2691-ipvoicek9-mz.124-13b

Go with this one :

c2691-ipvoicek9-mz.124-15.T14.bin


Br,
Nadeem 

Please rate all useful post.

Br, Nadeem Please rate all useful post.
New Member

What is a suitable CME for c2691-ipvoicek9-mz.124-13b

Thanks Nadeem,

I have c2600-ipvoicek9-mz.124-15.T14.bin

Would that do?

Cisco Employee

What is a suitable CME for c2691-ipvoicek9-mz.124-13b

No it wont.


Br,
Nadeem 

Please rate all useful post.

Br, Nadeem Please rate all useful post.
New Member

What is a suitable CME for c2691-ipvoicek9-mz.124-13b

Thanks Nadeem,

Will try this. May take about 4 days as internal router at home is dead. Have to replace it.

338
Views
0
Helpful
9
Replies