what is insted ata 186 ?

[Tagir Temirgaliyev]

i need sccp ata device. ata 186 end of sale. what is insted ?

ata 190 is sip.

[islam.kamal]

Hello

Kindly find the below link :-

Based on my information only 186 & 188 sccp , but bith if them end of sale and all existing ATAs support only sip

http://www.cisco.com/en/US/products/hw/gatecont/ps514/prod_eol_notice09186a008032d530.html

If you need additional information about road map for Cisco sccp ATA. Find the below:-

http://www.cisco.com/cisco/web/siteassets/contacts?locale=ga_IE&level1=85&level2=92&level3=93

thanks

please rate all useful information

[Aman Soi]

Hi ,

[+5] to Kamal

You need to go with Cisco ATA 190 which is SIP based since ATA 186[SIP/SCCP] ,187[SIP] and ATA 188[SIP/SCCP]. But all  are End of Sale.

http://www.cisco.com/c/en/us/products/collateral/unified-communications/ata190-2-port-adapter/datasheet-c78-731473.html

regds,

aman

[Gordon Ross]

I'd never heard of the ATA 190. Thanks for the heads-up!

Looking at the product page of the ATA 187, I can't see any end of sale notice for it. Do you have a link for this?

GTG

[Gordon Ross]

Silly me, the link to the ATA 187 End of Sale notice isn't on the ATA 187 product page. Why would anyone think of putting a link there?

http://www.cisco.com/c/en/us/products/collateral/unified-communications/ata-180-series-analog-telephone-adaptors/eos-eol-notice-c51-732166.html

GTG

[Gordon Ross]

You could use a VG202. That supports SCCP. But a VG202 is insanely expensive. Why do you need an SCCP ATA?

GTG

[Tagir Temirgaliyev]

because I want to use the same one number on two phones (sccp 7965 and sccp ata and wireless analog dect phone)

[Gordon Ross]

Not sure what your call control platform is, but there's nothing in CUCM stopping you having the same number on devices with different protocols. I'm sure here we've got numbers on both SCCP & SIP devices.

GTG

[Tagir Temirgaliyev]

cucm 9.1

when I use the same number on sccp7965 and another sip phone, and when calling this number both phones do not ring together. ringing only sccp phone. and it is impossible to hold call on first sccp phone and resume call on sip phone

[Gordon Ross]

I've just checked our cluster, and this definitely works. (We're on CUCM 9.1 too)

I suggest you start a new thread here to investigate why your scenario isn't working.

GTG

[Tagir Temirgaliyev]

tnx. I will check again with sccp and sip phones