BTW, my cisco AS5350 appear this message on the log and most of the calls drop hv failed. Once i restart the AS5350 for the 1st time, the problem still exist. After 2nd time reboot, the problem solve and all the channels are fully utilize. I m very doubtful. What i find from the web,
'The remote equipment cannot provide the requested channel for an unknown reason. This might be a temporary problem.'
I don't get any ideas from the above statement. Anyone mind to let me know the detail meaning of - no requested circuit. (44) ?
Explanation??? ISDN has detected a fatal system error.
Recommended Action??? Copy the error message exactly as it appears on the console or in the system log, contact your Cisco technical support representative, and provide the representative with the gathered information.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...