Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

when to set E1 PRI clock source?

hi all,

does any one know based one what i set the clock source to external or internal?. actually im connecting to Voice provider with E1 Line. should i ask the provider if they are the clock source? and if yes they provide the clock , then under the vwic should i use command clock source Line/internal??.

i appreciate if any experts could explain to me this paramter

  • IP Telephony
2 REPLIES
Hall of Fame Super Silver

Re: when to set E1 PRI clock source?

You should always clock of off telco equipment, leave the controller in default "line". Use network-clock-select command to specify clock preference.

HTH,

Chris

New Member

Re: when to set E1 PRI clock source?

thanks for the info below. so most of telco is clock source master?, so when i specifiy line in the gateway and external in call manager thats mean the router is slave for the clock and master or source of the clock is telco. ok when i make it internal it means the clock source is the router incase the telco not providing clock, im right?

178
Views
0
Helpful
2
Replies
This widget could not be displayed.