Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

When to use Line Group or Hunt Group

Hi everyone,

i dont get the difference between Line Group and Hunt Group (with or without Attendant COnsole.

Questions:

1- When you use line group and when you use Hunt Group?

3 REPLIES

Re: When to use Line Group or Hunt Group

You use a line group an I assume you mean a Hunt Pilot. The way it works is like this

you have a line group that contains the DN's that you want to hunt throught. you then have a hunt list which is a list of different line groups. Finally you have a hunt pilot which has the DN that you dial to start to hunt and a list of hunt list. I hope this helps. If you need any clarification please let me know.

Jason

New Member

Re: When to use Line Group or Hunt Group

Well that s the same thing as the Hunt Group/Pilot Point.

So the Question again is:

what s the deffirence in usinge Line Group/Hunt List/Hunt Pilot OR Attendant Console Hunt Group/Pilot point??

Re: When to use Line Group or Hunt Group

Sorry did not understand your initial question. The difference between these are that attendant console controlls the hunt pilot. This adds a couple of features such as a que for attendant console users. Instead of adding DN's to a normal hunt group you add users and physical lines to a AC Hunt Group. For instance I controll a phone that has 6 lines on it. In the line group I would add my username and line 1, line 2, line 3, line 4, line 5 and line 6 instead of a regular line group were I would add 4000, 4001, 4002, 4003, 4004, 4005 and 4006. I hope this makes since please let me know.

207
Views
0
Helpful
3
Replies