which CME ver support 7937G Conference Station,Expansion model 7914 and ATA 187/188

[johntim20]

Does 2911 UC Bundle w/PVDM3-16,FL-CME-SRST-25, UCLicense PAK CUCME  includes 8.8 or 7.1 Version  and which CME version supports this below devices:

1) Cisco Ip Phone 7937G Conference Station

2) Cisco Ip phone Expansion model 7914/7916

3) Cisco ATA 187/188 and how to configure this two into this 2911 voice gateway.

Thanks in Advance.

[D_Lebedev]

Hi,

Not ATA 187,but all other devices supported in

CME 8.6

CME 7.0(1)

CME 8.0

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme86spc.htm.html

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme701spc.htm

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme80spc.htm

Compability matrix:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm

Hope,it helps

Dmitriy.

[johntim20]

Thanks for your reply But how about connecting fax machine is their any alternate solution to adopt