Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Which dial peer is it going out of? VOIP Questions

Hello all,

I am in the need of some help here please.

I have a call being matched with several dial peer and i was wondering which dial peer did it choose at the end of the search, i know that the longest match is the one, but how do i see this in the debug?

here is what i got:

debug dialpeer:

Dec 15 04:45:14.948: Inside dpMatchPeersMoreArg

Dec 15 04:45:14.948: dpMatchPeersMoreArg: Match Dest. pattern; called (1128187069780)

Dec 15 04:45:14.948: Inside dpMatchCore:

Dec 15 04:45:14.948: destination pattn: 1128187069780 expanded string: 1128187069780

Dec 15 04:45:14.948: MatchNextPeer: Peer 11 matched

Dec 15 04:45:14.948: MatchNextPeer: Peer 13 matched

Dec 15 04:45:14.948: MatchNextPeer: Peer 21 matched

Dec 15 04:45:14.948: MatchNextPeer: Peer 23 matched

Dec 15 04:45:14.948: MatchNextPeer: Peer 1111 matched

Dec 15 04:45:14.948: dpMatchPeersMoreArg: Result=0 after MATCH_ORIGINATE

so how do i know what dial peer it send the call to?

am i doing the right debug ?

any help in the matter would be well appreciated.

Thanks,

Jonathan

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Which dial peer is it going out of? VOIP Questions

Hi Jonathan,

Glad to see the info can help you :)

Remember to rate useful posts so that info provided will help to other people with same issues ;)

Best regards,

- Adrián.

3 REPLIES

Re: Which dial peer is it going out of? VOIP Questions

Hi Jonathan,

You can use show call active voice command to display active call information in progress. It display the contents of the active call table (information about call times, dial peers, connections, quality of service, etc).

More to read about its usage:

http://www.cisco.com/en/US/docs/ios/12_2/voice/command/reference/vrf_r.html#wp1113752

Also you can use the show voice call status and see which inbound and outbound dial-peers are being used by an active call.

Additionally, there is the show dialplan number command to display which outgoing dial peer is reached when a particular telephone number is dialed.

More to read about its usage:

http://www.cisco.com/en/US/docs/ios/12_3/vvf_r/vrg_sh2_ps1839_TSD_Products_Command_Reference_Chapter.html#wp999333

Hope this help you.

- Adrián.

New Member

Re: Which dial peer is it going out of? VOIP Questions

Hey Adrian,

Thanks for the help, you are on the money there, well appreciated...... ;)

J.

Re: Which dial peer is it going out of? VOIP Questions

Hi Jonathan,

Glad to see the info can help you :)

Remember to rate useful posts so that info provided will help to other people with same issues ;)

Best regards,

- Adrián.

123
Views
0
Helpful
3
Replies