Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Why do I get this debug (voice), even if I undebug all.

Hi all,

I am workiong in my router from a telnet terminal, I needed to do some debugs, but every time y use de "term moni" commando, I get those lines when a call is finished.

175139: Aug 29 22:20:11: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 2, ConnectionId 80DD50F5F0E9E103DF003D05A021522, SetupTime 22:20:00.475 GMT-7 Wed Aug 29 2012, PeerAddress 804375103, PeerSubAddress , DisconnectCause 10  , DisconnectText normal call clearing (16), ConnectTime 22:20:07.485 GMT-7 Wed Aug 29 2012, DisconnectTime 22:20:11.265 GMT-7 Wed Aug 29 2012, CallOrigin 2, ChargedUnits 0, InfoType 2, TransmitPackets 200, TransmitBytes 32000, ReceivePackets 0, ReceiveBytes 0

175140: Aug 29 22:20:11: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEATURE_VSA=fn:TWC,ft:08/29/2012 22:20:00.473,cgn:804375103,cdn:9018001232222,frs:0,fid:85993,fcid:80DD50F5F0E9E103DF003D05A021522,legID:14FE9

175141: Aug 29 22:20:11: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId 80DD50F5F0E9E103DF003D05A021522, SetupTime 22:20:00.751 GMT-7 Wed Aug 29 2012, PeerAddress 9018001232222, PeerSubAddress , DisconnectCause 10  , DisconnectText normal call clearing (16), ConnectTime 22:20:07.481 GMT-7 Wed Aug 29 2012, DisconnectTime 22:20:11.341 GMT-7 Wed Aug 29 2012, CallOrigin 1, ChargedUnits 0, InfoType 2, TransmitPackets 0, TransmitBytes 0, ReceivePackets 200, ReceiveBytes 32000

175142: Aug 29 22:20:11: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEATURE_VSA=fn:TWC,ft:08/29/2012 22:20:00.477,cgn:804375103,cdn:9018001232222,frs:0,fid:85994,fcid:80DD50F5F0E9E103DF003D05A021522,legID:14FEA

It is really anoying, I've tried these commandos.

logging buffered 51200 warnings

and the

undebug all

still get those lines.

Could you help me with this?

Reggards

This is te info of my router.

Cisco IOS Software, 3800 Software (C3825-SPSERVICESK9-M), Version 12.4(4)XC7, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Wed 01-Aug-07 02:10 by alnguyen

ROM: System Bootstrap, Version 12.4(13r)T11, RELEASE SOFTWARE (fc1)

gwhervpn uptime is 9 weeks, 2 days, 9 hours, 30 minutes

System returned to ROM by power-on

System restarted at 12:56:38 GMT-7 Mon Jun 25 2012

System image file is "flash:c3825-spservicesk9-mz.124-4.XC7.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 3825 (revision 1.0) with 220160K/41984K bytes of memory.

Processor board ID

2 Gigabit Ethernet interfaces

4 Serial interfaces

1 terminal line

4 Channelized E1/PRI ports

4 Voice FXO interfaces

1 cisco Integrated Service Engine(s)

   Cisco Unity Express 3.2.2 in slot 2

DRAM configuration is 64 bits wide with parity enabled.

479K bytes of NVRAM.

62592K bytes of ATA System CompactFlash (Read/Write)

Configuration register is 0x2102

1 ACCEPTED SOLUTION

Accepted Solutions
Gold

Why do I get this debug (voice), even if I undebug all.

Juan,

It's not a debug output. CDR logging to syslog is a configurable option and you seem to have it turned on. Look for the command "gw-accounting syslog" or similar in your running config, and remove it.

6 REPLIES
Hall of Fame Super Silver

Why do I get this debug (voice), even if I undebug all.

What do you see when you issue "show debug"?

I would recommend upgrading IOS as this is very dated version and in fact one that was never very popular and widely deployed/recommended. I recommend 15.1.4M train.

HTH,

Chris

New Member

Why do I get this debug (voice), even if I undebug all.

You can check whether any debugs are still enabled using the command 'show debug'.

Gold

Why do I get this debug (voice), even if I undebug all.

Juan,

It's not a debug output. CDR logging to syslog is a configurable option and you seem to have it turned on. Look for the command "gw-accounting syslog" or similar in your running config, and remove it.

Why do I get this debug (voice), even if I undebug all.

Thank you jasyoung!

It disapeared with that

5 stars

New Member

I have a new client and these

I have a new client and these logs were driving me NUTS!  'no gw-accounting syslog' did the trick!

Thanks!

New Member

I had the same issue and

I had the same issue and removing "no gw-accounting syslog " helped me as well. Thank you jasyoung.

1540
Views
10
Helpful
6
Replies
CreatePlease to create content