Re: will unity failover server disrupt MWI delivery?
It will still be real time. Unity Failover is an exact copy of the primary server. It will still monitor Exchange for new Voicemails, and signal to CCM MWIs at the phones. Just keep in mind that if the servers keep going between failover and primary. (flip flopping) your MWIs could become out of sync. This is where the MWI syncing in the AM is great.
I would highly recommend running a test of your failover configurations after hours. Run Failover Monitor on the Primary Unity server, Force Failover, test voicemail and MWI.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...