Ok so I'm the proud owner of a WIP310, using it with a D-Link 624 router. Most of the time it can connect to the network fine (although I have noticed that it also shuts down my capability to access the internet off the pcs) It says it is registering but this fails. The VOIP supplier have supplied me with the username/password/domain set which I have entered the domain into the proxy field on the ext1 tab, username into user id and password into password. I imagine this must be a great phone a little help would go along way to me appreciating it even more
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...