Hey, I'm just setting up a new CUCM6.1 with new CUWL licenses and am in the learning stages too.
From what I know, the licenses are all seperate for CUCM, Unity, Presence and Meeting Place. Cisco would give you 4 different license PAK codes and you would need to go to the Cisco Licensing page to get the license files for each of them.
For the new CUCM6, you would need to upload the license file so that you have the sufficient DLU to configure the phones.
One of the issue i had was that Cisco gave us the wrong versions and wrong number of ports but once that was fixed, the licenses got installed pretty quickly.
Yes, that is the same. In my setup, we actually purchased CUWL licenses and Cisco sent us 4 PAK codes. So we had to go to Cisco Licensing and get the 4 license keys to apply them to the appropriate servers.
CUCM, Unity, Meeting Place and Presence if i'm not wrong.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...