Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Worm Line

Hi all,

Can any one tell me if its possible to configure on the callmaner a worm line. This is a line that as the folowing beahvior:

The user goes off-hook on the phone, if the user does not dial any number for 10s then the call manager dial a pre define number like a hot line.

Is this possible with same kind of configuration on the callmanager ?

Thanks

3 REPLIES
Bronze

Re: Worm Line

Hi,

You could configure PLAR which does similiar thing but not sure about 10 second wait time. What version of CUCM you are using?

Cheers

Ikram

New Member

Re: Worm Line

Hi,

CM 6.1(2)

I have configure PLAR but the customer wants two wait a 10s.

The customer wants to :

The phone goes off-hook, if the user dial any number the callmanager makes the call but if the user does not dial any number for a 10s periode, the callmanager then places a call to a pre-define number.

Thanks

Cisco Employee

Re: Worm Line

not possible to add a delay, the whole background on a PLAR is that you do not have any more matches other than the blank translation pattern and then it dials.

adding a number to the translation pattern would only cause it to be a pattern and would follow the 1st digit timeout and clear the call if nothing is dialed

the plar would only work if you leave a blank as the pattern to match

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
595
Views
1
Helpful
3
Replies
CreatePlease to create content