Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
You may experience some slow load times, errors, and slight inconsistencies. We ask for your patience as we finalize the launch. Thank you.

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Wrong dialed number showed

In CUCM8.6, i configured a route pattern:2.XXX,just do predot and prefix 2 in called party.
In route list,i add a h323 gw,and used predot and prefix 81.
In H323 gw ,it just only one dial-peer
"destination-patt 81...$
po 0/2/0"

So, when user placed call to 2111,it should translate to 81111.

Here is the problem,when user dialed 2111, it showed "To 2111" after 1 second, it changed to "To 8111".

So how to just make it showed "To 2111" ?

  • IP Telephony
1 ACCEPTED SOLUTION

Accepted Solutions

Re: Wrong dialed number showed

Add this to your H.323 VGW.

voice service voip
no supplementary-service h225-notify cid-update

Sent from Cisco Technical Support iPhone App

Please remember to rate helpful responses and identify helpful or correct answers.
3 REPLIES

Re: Wrong dialed number showed

Add this to your H.323 VGW.

voice service voip
no supplementary-service h225-notify cid-update

Sent from Cisco Technical Support iPhone App

Please remember to rate helpful responses and identify helpful or correct answers.
New Member

Re: Wrong dialed number showed

Wow,It worked, rate you 5 star for this!

Sent from Cisco Technical Support iPad App

Re: Wrong dialed number showed

Thank you for the nice rating and I'm glad that it solved your problem :)

Sent from Cisco Technical Support iPhone App

Please remember to rate helpful responses and identify helpful or correct answers.
143
Views
0
Helpful
3
Replies