XML Code displaying on phone for Weather Application
I have a weather application that is working for the most part, but when it displays on the phone some of the charcters are not correct. Below is the ouput from the WEB BROWSER:
Peoria, IL Forecast− Updated: 10:54 AM CDT on May 19, 2010 Observed at Peoria, Illinois Temperature 68°F / 20°C Humidity 50% Dew Point 49°F / 9°C Wind NNE at 10 mph / 17 km/h Pressure 30.04 in / 1017 hPa (Falling) Conditions Clear Visibility 10.0 miles / 16.1 kilometers UV 9 out of 16 Clouds Clear (CLR) : - Yesterday's Maximum 70°F / 21°C Yesterday's Minimum 52°F / 11°C Yesterday's Heating Degree Days 4 Sunrise 5:38 AM CDT Sunset 8:12 PM CDT Moon Rise 11:09 AM CDT Moon Set 12:39 AM CDT Moon Phase Moon Phase Waxing Crescent Raw METAR METAR KPIA 191554Z 02009KT 10SM CLR 20/09 A3004 RMK AO2 SLP171 T02000094 Greater Peoria Regional, IL Current Radar Radar Map Zoom into radar image Zoom into animated radar image Forecast as of 9:50 am CDT on May 19, 2010 Rest of Today Mostly sunny. Highs in the lower 70s. Northeast winds 10 to 15 mph. Tonight Partly cloudy. Lows in the lower 50s. East winds 5 to 10 mph. Thursday Partly sunny. Highs in the lower 70s. East winds 10 to 15 mph. Thursday Night Chance of showers in the evening...then showers likely after midnight. Lows in the mid 50s. Southeast winds 10 to 15 mph. Chance of precipitation 60 percent. Friday Showers likely. Highs around 70. South winds 10 to 15 mph. Chance of precipitation 70 percent. Friday Night Mostly cloudy. A 40 percent chance of showers in the evening. Lows in the mid 50s. Saturday and Saturday Night Partly cloudy. Highs around 80. Lows in the lower 60s. Sunday through Tuesday Mostly clear. Highs in the mid 80s. Lows in the mid 60s. Scientific forecaster discussion (NWS) − Back SoftKey:Exit 3
My issue is when it displays on the phone items such as the 68°F show up crazy. I have written this in perl and is is possible to send °; via xml to the phone?
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...