Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

xrule with tag <xx> doesn't exist , CME 7.0

Hi ,

have a small problem with the translation profile rule :

on cme 2801 do the following config.

voice translation-rule 81

rule 1 /^81/ //

!

!

voice translation-profile strip81

translate called 81

dial-peer voice 31 voip

translation-profile outgoing strip81

destination-pattern 81T

voice-class sip transport switch udp tcp

session protocol sipv2

session target ipv4:xxx.xxx.xxx.xxx

dtmf-relay sip-notify

when try to show te rule with "sh translation-rule" no rule exist .

There are someone with any idea ??

1 ACCEPTED SOLUTION

Accepted Solutions

Re: xrule with tag <xx> doesn't exist , CME 7.0

Hello,

Try "show voice translation-rule"

Hope that helped, if so please rate.

1 REPLY

Re: xrule with tag <xx> doesn't exist , CME 7.0

Hello,

Try "show voice translation-rule"

Hope that helped, if so please rate.

182
Views
0
Helpful
1
Replies
CreatePlease to create content