Hi, I am having issues resequencing an IPv6 access-list..I do'nt get any options in the IOS.IPv4 resequencing works fine.
Router(config)#ip access-list ? extended Extended Access List helper Access List acts on helper-address log-update Control access list log updates logging Control access list logging resequence Resequence Access List standard Standard Access List
Router(config)#ipv6 acc Router(config)#ipv6 access-list ? WORD User selected string identifying this access list log-update Control access list log updates
Router(config-subif)#do sh ver Cisco IOS Software, 1841 Software (C1841-ADVENTERPRISEK9-M), Version 15.1(4)M2, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2011 by Cisco Systems, Inc. Compiled Mon 26-Sep-11 15:48 by prod_rel_team ROM: System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1) Router uptime is 9 minutes System returned to ROM by reload at 04:11:11 UTC Tue Nov 15 2011 System image file is "flash:c1841-adventerprisek9-mz.151-4.M2.bin" Last reload type: Normal Reload
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...