Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IPV6 BGP

hi , is ASR 9006 RSP or Ethernet line cards support IPV6 BGP because i did not see it in the data sheet?.

  • IPv6 Integration and Transition
6 REPLIES
Cisco Employee

IPV6 BGP

Hi,

I don't deal with ASR9k normally but a quick check internally and I do see support for IPv6 address-family IPv6 transport should exist.

Best contact your Cisco SE to know of any restrictions.

IPv6 Unicast Routing on Cisco ASR 9000's A9K-SIP-700

Cisco ASR 9000's A9K-SIP-700 provides complete  Internet Protocol Version 6 (IPv6) unicast capability.

http://www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r4.1/routing/configuration/guide/routing_cg41asr9k_chapter1.html

Marcin

Cisco Employee

IPV6 BGP

Hi,

Yes the ASR9k support BGP for IPv6.

HTH

Laurent.

New Member

IPV6 BGP

whay is the size of the full internet routing table for IPv6?

Re: IPV6 BGP

Just over 4k prefixes for now.

Samir

Sent from Cisco Technical Support iPad App

New Member

IPV6 BGP

do you think enable IPv6 on internet router Gateway (GSR 12410 with PRP2) having full internet route table for IPv4 and also Plus IPv6 Full internet routing table.

now the CPU utilization is around 50% with IPv4 if we enable the IPv6 how much do you expect the increae in the CPU?.

and how is the IPv6 will be handle.is it extra process in the cpu?. do you have a document to explain?.

New Member

Re: IPV6 BGP

You should be fine. No real issues.

I am currently recieving the full routing table on 7301 for IPv4 and IPv6.

883
Views
0
Helpful
6
Replies