I try to configured server DHCP IPV6, but I don't see all command !!!!
router_A(config)#ipv6 dhcp pool client_siteA
router_A(config-dhcp)#? IPv6 DHCP configuration commands: default Set a command to its defaults dns-server DNS servers domain-name Domain name to complete unqualified host names exit Exit from DHCPv6 configuration mode no Negate a command or set its defaults prefix-delegation IPv6 prefix delegation sip SIP Servers options
I don't configured the addressprefix ???
Bad version ?
router_A#sh run Building configuration...
Current configuration : 1297 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname router_A ! boot-start-marker boot-end-marker ! ! no aaa new-model ! ! ip cef no ip domain lookup ip domain name lab.local ! ! ipv6 unicast-routing ipv6 cef ipv6 dhcp pool client_siteA dns-server 2001:4860:4860::8888 dns-server 2001:4860:4860::4444 domain-name nantes.net ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface FastEthernet0/0 no ip address duplex auto speed auto ipv6 address FC00:1::1/64 ipv6 ospf 1 area 0 ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface FastEthernet1/0 description Site-Local no ip address duplex auto speed auto ipv6 address FC00::1/64 ipv6 nd managed-config-flag ipv6 nd other-config-flag ipv6 dhcp server client_siteA ! interface FastEthernet1/1 no ip address shutdown duplex auto speed auto ! ip forward-protocol nd ! no ip http server ! ! ipv6 router ospf 1 router-id 184.108.40.206 log-adjacency-changes redistribute connected ! ! ! ! control-plane ! ! ! ! ! ! line con 0 exec-timeout 0 0 privilege level 15 logging synchronous escape-character 3 stopbits 1 line aux 0 exec-timeout 0 0 privilege level 15 logging synchronous stopbits 1 line vty 0 4 login ! ! end
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...