cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2951
Views
0
Helpful
2
Replies

restricting ipv6 pim rp to a specific group only

puneet24_in
Level 1
Level 1

Hi,

I want to restrict the IPv6 pim rp to a particular group. No other group should be serviced by this pim rp.

How to achieve this?

The topology is as below:

R1(f0/0) ----- (f0/0)R2(f0/1) ------(f0/1)R3(f0/0)-----------(f0/0)R4(f0/1)

I want to configure R1 as the ipv6 pim rp. it should service only group FF08::1234:4567. I have configured the global ipv6 add of R1 (f0/0) as the pim rp add on all routers.

I have configured R4 as the receiver of the group FF08::1234:4567.

2 Replies 2

abdel_n
Level 1
Level 1

Hi puneet24,

Configure the PIM RP address of your router R1 fa0/0 IPv6 address for the multicast group FF08::1234:4567 only:

ipv6 access-list mygroup

permit ipv6 any FF08::1234:4567

ipv6 pim rp-address mygroup

http://www.cisco.com/en/US/docs/ios-xml/ios/ipv6/command/ipv6-i4.html#GUID-67D6A2B9-259F-4335-92C4-2D45A1FAE67A

Marcin Latosiewicz
Cisco Employee
Cisco Employee
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: