08-15-2012 02:30 AM - edited 03-17-2019 02:33 PM
i have configured anyconnect vpn on cme and connected the iphone to vpn using anyconnected secure mobillity client.its working good.but i couldnt access the internet.why is that?
08-23-2012 10:06 AM
my first guess woulkd be that the ssl anyconnect is not set for split tunneling and the cmeis not allowing the traffic from the iPanto haqirpin within the CME/router box
Sent from Cisco Technical Support iPad App
08-23-2012 10:21 AM
Look at Split-Tunneling as advised by Richard (it has to be disabled) and your NAT-settings.
--
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
08-23-2012 11:13 PM
After reading your post again: I understood your post that way that you want to reach the internet through your router. Then you need split-tunneling disabled und NAT for the external clients. But if the clients should reach the internet directly, then split-tunneling has to be enabled.
Sent from Cisco Technical Support iPad App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: