anyconnect vpn on iphone

[tkavithas87]

i have configured anyconnect vpn on cme and connected the iphone to vpn using anyconnected secure mobillity client.its working good.but i couldnt access  the internet.why is that?

[RICHARD MESSINGER]

my first guess woulkd be that the ssl anyconnect is not set for split tunneling and the cmeis not allowing the traffic from the iPanto haqirpin within the CME/router box

Sent from Cisco Technical Support iPad App

[Karsten Iwen]

Look at Split-Tunneling as advised by Richard (it has to be disabled) and your NAT-settings.

-- 
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

[Karsten Iwen]

After reading your post again: I understood your post that way that you want to reach the internet through your router. Then you need split-tunneling disabled und NAT for the external clients. But if the clients should reach the internet directly, then split-tunneling has to be enabled.

Sent from Cisco Technical Support iPad App