Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CCMCIP Profile

Hello

 

I have 3 servers in group, when i shut publisher,subscriber it failsover to subscriber in DR and everything work fine except jabber softphone becz CCMCIP profile when we create we get only 2 CUCM ip address options,there is no option for 3rd.

How to achieve the redundancy with  DR 3rd CUCM which is active.

thanks

11 REPLIES
Cisco Employee

Very interesting question :)

Very interesting question :)

 

I was researching on this, and in the guide for iPad, I see a SRV record for CCMCIP.

 

http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPad/9_x/JABP_BK_CB31C807_00_cisco-jabber-for-ipad-931_chapter_01.pdf

 

 

Im unsure how to use this or if any other work around is available. I will research on this.

New Member

Dear Nissac, the CCMCIP

Dear Nissac,

 

the CCMCIP profile what we create in CUP there is no option to put srv record except a hostname or Ip address,

 

this guide is for jabber for ipad it will help for J4W also.

 

thanks

Cisco Employee

I would suggest to have the

I would suggest to have the Publisher and the Sub in DR on the list of CCMCIP in CUPS

As of now we can have only 2 CCMCIP records on the CUPS server

The DNS SRV record will be used by the Jabber client when it is on MRA/Collab-edge, you need to add the DNS SRV record on your Microsoft DNS server, it cannot be added to the Cisco servers

New Member

DearThe DNS SRV record will

Dear

The DNS SRV record will be used by the Jabber client when it is on MRA/Collab-edge,

 what is MRA/Collab-edge ??

the DNS SRV record on your Microsoft DNS server, it cannot be added to the Cisco servers

yes i know that we have to create in DNS but the srv destination also need to be configured in CUPS as similar to configuration of SRV destination in  SIP trunk which is between cucm and cup.

 

thanks

thanks

Cisco Employee

MRA/Collab-edge is when

MRA/Collab-edge is when Jabber clients connect to the UC servers with Expressway or in short VPN'less connectivity of Jabber

You don't need to add the SRV destination to the CUPS server

 

New Member

Dear Mallaka,So you are

Dear Mallaka,

So you are confirming to me that only 2 CCMCIP can be entered in CUP, so there should be manual change to the 3rd if incase pub,sub goes down.

thanks

New Member

Dear Experts,Anybody can

Dear Experts,

Anybody can confirm me there is no way for 3rd CCMCIP IP, it has to be changed manually for jabber to work.

Thanks

Cisco Employee

Hi Sorry for the delay Yes,

Hi 

Sorry for the delay

 

Yes, right now there isn't any other option

New Member

Thanks for confirming

Thanks for confirming

Cisco Employee

I ll see if we can have a

I ll see if we can have a feature request for more CCMCIP profile servers

I ll post on the thread once i have more info

Thanks

New Member

I have rated for your

I have rated for your comments on the post,

Be helpful to others, GOD will be helpful for you.

Thanks

2767
Views
10
Helpful
11
Replies
CreatePlease to create content