We have installed and configured CUCM 9.1 and IM & Presence 9.1. Our customer is running Jabber 9.6 under Citrix VDI-envoirnment.
I have created CSR for all CUCM and IM&Presence Nodes and let them signed by an external CA. I've uploaded the CA Root certificate and the signed Identity certificates on all the nodes and restarted Tomcat.
All the clients have the CA's Root certificate and to make sure I have installed the CA's Root certificate once again.
When I start the Jabber 9.6, I'm still getting pop-ups for CUCM and CUPS certificates.
I'm using Cisco-UDS for login and they are getting the correct information with FQDN and no IP Addresses.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...