Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CISCO Jabber and CME 8.6

Is it possible to connect CISCO Jabber to CME 8.6

10x in advanced

  • Jabber Clients
Cisco Employee

CISCO Jabber and CME 8.6


Hoping you are doing well.

Firstly thank you fo contacting Cisco Support Community. Below is a brief sumamry on the query:

The Cisco Jabber for Android is designed in order to work with Cisco Call manager and Cisco Unity Connection.

CIsco Jabber for Andoid includes following limitations and restrictions. Below is the resource link:

As per the above link:

Telephone integration with call manager versions 6.1.5, 7.1.5, 8.0.3, 8.5, and 8.6 ONLY

Hope the above was informative. Please let me know if you have any further queries and we will be more than happy in assisting further on the same.

Thanks and Regards

Prashanthi Velpula

New Member

CISCO Jabber and CME 8.6

CME is supported for Cisco Jabber

voice service voip

ip address trusted list


allow-connections sip to sip


  bind control source-interface GigabitEthernet0/1

  bind media source-interface GigabitEthernet0/1

  registrar server

voice register global

mode cme

source-address port 5060

max-dn 8

max-pool 8

authenticate register

authenticate realm firewallcx

tftp-path flash:

file text

create profile sync 0033775744721428

voice register dn  5

number 778

name Chris-Android 778

label Chris-Android 778


voice register pool  1

registration-timer max 720 min 660

id mac 147D.C5AF.79B2

session-transport tcp

type Jabber-Android

number 1 dn 5

username chris password firewallcx

codec g729r8