Cisco Jabber iPhone\Android reconnect time in mobile\Wi-Fi networks
In our environment we have deployed BE6000 with cisco Jabber iPhone\Android clients. In corporate wi-fi network all mobile clients iPhone\Android work fine. But when the users go out from coverage of corporate wi-fi network and connect to mobile data network and then connect to corporate network with cisco anyconnect VPN client the cisco Jabber iPhone\Android app needs to log off and then sign in again to get connected to IMP and CUCM servers. The same thing we can see as the client returns from mobile data network to corporate wi-fi - the Jabber app dont reconnect to servers. Is there any documents that show how the mobile app works (what is reconect time, retry timeout or smthg else)?
Or is there any configuration issues that can be made to avoid this issue?
Also can the SIP profile affect the behavior of app in this case?
Note: we are not using any of expressway products for outbound clients.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...