So as the title said I successfully configured Cisco Jabber on CME 8.6, can place call and receive calls from sccp phones etc.
I am bringing the testing a bit furthe, i deployed Extension mobility on my SCCP phones and i would like the extension mobility users when not logged on a desk phone to receive the calls on their Iphone (or other smarthone using jabber) through the same extension number.
Cisco jabber seems to come with some desk phone integration (which according to the documents i read would provide just that) but when I tye in the creds of my extension mobility users i get an error message on my Jabber.
I know SNR doesnt workwith CME extensions (or at least i think), Call-forward noan could be it but no parrallel command on it, i keep looking at the command list under ephone-dn just cant make out the one you are mentioning
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...