I have a problem with Cisco Mobile 8.0 connected to CUCM 8.6. First off, all CUCM PSTN routing is implemented via National Numbering Plan file and works fine for SCCP devices. However, every time I type some number and hit "Dial" from Cisco Mobile for Iphone client there is a noticeable delay which, I think, is an interdigit timeout. Calls get through very fast if a pound (#) sign is appended.
There are no any application/sip dial rules configured. Those don't allow adding anything to the END of numbers. Besides, I hope I'm not expected to re-implement the national plan for jabber by hand.
I think this behavior is not correct. As long as CUCM receives the whole dialed string, it should process it by usual call routing rules.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...