Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CUCILYNC 9.2.3 dial via Drag and Drop

Hi,

I`m using the CUCLYNC version 9.2.3 and i have a problem with dialing a contact from Lync via Drag and Drop at the Docked Window ( Jabber Phone ).

When i move a selected contact at the Jabber Phone i´m getting the message " No Phone number found for stefan.ehler@........"

At the wireshark trace i can see that CUCLINY does not send an LDAP query.

Is this behavior caused by a configuration issue or is it a bug?

Calling a contact from Lync is possible when you make a right click and select "calling" than the call will use the Jabber phone.

Any idea?

Best regards

Stefan

3 REPLIES
Hall of Fame Super Silver

Re: CUCILYNC 9.2.3 dial via Drag and Drop

Yes thus us expected with cuci lync 9 as it does not support drag and drop functionality like the previous version did, hopefully Cisco will address this in future releases.

Chris

Sent from Cisco Technical Support iPhone App

New Member

Re: CUCILYNC 9.2.3 dial via Drag and Drop

Hi Chris,,

this sounds not good because it is a step backwards.

Thanks

Stefan

Hall of Fame Super Silver

Re: CUCILYNC 9.2.3 dial via Drag and Drop

Agree with you 100%.  CUCI-Lync is not basically Jabber as phone, with some small plugins to Lync.  Big step backward.

All you can do is complain to your Cisco AM.

HTH, please rate all useful posts!

Chris

492
Views
0
Helpful
3
Replies
CreatePlease to create content