I think I have uncovered a bug related to custom tabs. When a user adds a custom tab with an URL containing an ampersand (&), the config file will become invalid. The page will load fine in Jabber, but when restarting Jabber, the custom tab will be lost, along with all other custom tabs and possibly other settings as well. The problem seems to be that the URL is not properly encoded before it gets added to the config file which then becomes invalid.
We have created a workaround for our service by changing our URL structure so this is not a problem for us at the moment, but it should probably be fixed in Jabber to prevent problems for other websites. Not sure where to report this bug, but hopefully it will be picked up by someone here.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...