I'm having trouble getting my iPhone to make video calls. I can make video calls via J4W with the same CUCM/IM-P cluster, and my iPhone Jabber client is having no problem getting IMs, presence information, or making standard voice calls, but when I go to "Settings - Audio and Video", it simply has a message that says "Video is currently unavailable"
The "Dual-Mode for iPhone" device in CUCM has video calling enabled. What other settings could I be missing?
I'm running into the same issue on a particular iPhone for a user. Other iPhone users are working just fine, and I've provisioned all the TCT devices using BAT, so they're all the same. Any feedback on this one yet? Thanks!
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...