J4W with CME

[adamgibs7]

Dear

I have a 10 users license for J4W with CME, this is my first setup with CME, so anybody can route me to the proper documentation.

Thanks

[Amit Kumar]

Below are few links that may help;

for support information of jabber with CME ; http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmelabel.html#pgfId-1058022

For configuration of J4W CSF device  ;  http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmelabel.html#66727

For configuration example of J4W CSF device; http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmelabel.html#33241

- rate if this helps.

[adamgibs7]

Dear Amit,

sorry for the late reply.

I have used jabber with presence/cucm server where cucm is integrated with AD and authentication is been done on AD and  I was using the SRV records for login in which we specify the presence server name and port while login in Jabber

But

How would be the scenario in CME,???  in this scenario I don't have any presence server so how the login process/authentication will happen in CME ???

thanks

[adamgibs7]

Dear Experts,

Anybody can help me for the above

thanks