Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Jabber 8.6 fails to register on CUCM8.5 only through anyconnect

Hi all,

i have managed to register my Jabber to the CUCM and it works fine even  through the data vlan via the ASA to the voice vlan. I use a profile  with no digest authentication.

I turn on anyconnect and i get connected to the corporate network.

I can even browse to the CUCMs webgui via full fqdn!

There are no inspect rules in ASA or other rules to the voice network.

There is no way i can get my jabber registered.

Any ideas will be much appreciated.

ASA is running: 8.2.5 and has the following licenses:

asa_licenses.jpg

  • Jabber Clients
1 REPLY
Bronze

from the screen capture i see

from the screen capture i see you are using jabber for mobile, but is this jabber for ios or jabber for android ?

what is the complete version of jabber ?

568
Views
0
Helpful
1
Replies
This widget could not be displayed.