Finally I'm very close to having a client that I can easily role out on mass to endusers.
I have CUCM and IM & P 9.1.2
Jabber Client 9.2.6
Cisco Webex Meeting Server 1.5 (user sync'd to CUCM)
Jabber client and CWMS works great individually with users using the AD password to login. The problem I have is that CWMS uses Email ID to login and Jabber uses userid. Which means that I have to get the users to manually setup Webex on there Jabber client and everytime there password changes they will have to manually change there webex password in the client. All this seems crazy when both products are authentication to the same source.
Is there away to sort the user authenication side of this out?
Even if I had to change the jabber client to email ID authentication that would be better.
In Jabber, primary authentication parameter used is samaAccountName field in AD.
I guess there are two choices for you, one is to change format of that parameter - samaAccountName, or to change primary authatication parameter on CUCM (onder LDAP synchronization). For example - email.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...