Custom contacts are only supported in on-premises deployments.
Custom Contacts are contact entries for people who are not part of your organization's directory. You can create custom contacts a number of ways:
From File menu on the hub window From right-clicking an entry in the Call History or Voicemail tab and selecting Create custom contact
Importing federated contacts
Custom contacts support up to six phone numbers or SIP URI addresses, which follow a email@example.com format. Custom contacts can be created without an IM address or Jabber ID. After a custom contact is created, the value entered in the IM address field cannot be changed.
Custom contacts require no additional administrative configuration.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...